Partial Fee Delegation

FeeDelegatedValueTransferWithRatio

caver.transaction.feeDelegatedValueTransferWithRatio.create(transactionObject)

FeeDelegatedValueTransferWithRatio represents a fee delegated value transfer with ratio transaction. The transactionObject can have properties below to create a FeeDelegatedValueTransferWithRatio transaction.

FeeDelegatedValueTransferWithRatio has the properties below as its member variables. Properties marked as optional refer to properties that can be optionally defined in transactionObject when the user creates FeeDelegatedValueTransfer transaction.

NOTE: You can create an instance of FeeDelegatedValueTransferWithRatio from RLP-encoded strings. Please refer to the below example. NOTE: caver.transaction.feeDelegatedValueTransferWithRatio.create is supported since caver-js v1.6.1.

NOTE: As of caver-js v1.8.1-rc.4, creating transactions is only supported using the create function. If you've been creating transactions using a constructor like new caver.transaction.feeDelegatedValueTransferWithRatio({...}), please change it to caver.transaction.feeDelegatedValueTransferWithRatio.create({...}).

properties

NameTypeDescription

value

string

The amount of KLAY in peb to be transferred. You can use caver.utils.toPeb.

from

string

The address of the sender.

to

string

The account address that will receive the transferred value.

gas

string

The maximum amount of transaction fee the transaction is allowed to use.

feeRatio

string

The ratio that constitutes the proportion of the transaction fee the fee payer will be burdened with. The valid range of this ratio is between 1 and 99. The ratio of 0, or 100 and above are not allowed.

signatures

Array

(optional) An array of signatures.

feePayerSignatures

Array

(optional) An array of feePayerSignatures.

feePayer

string

(optional) The address of fee payer.

nonce

string

(optional) A value used to uniquely identify a sender’s transaction. If omitted, caver.rpc.klay.getTransactionCount(address, 'pending') will be used to set nonce.

gasPrice

string

(optional) A multiplier to get how much the sender will pay in tokens. If omitted, caver.rpc.klay.getGasPrice will be used to set gasPrice.

chainId

string

(optional) The chain id of the Klaytn network. If omitted, caver.rpc.klay.getChainId will be used to set chainId.

Example

// Create a feeDelegatedValueTransferWithRatio
> caver.transaction.feeDelegatedValueTransferWithRatio({
    from: '0x{address in hex}',
    to: '0x9957dfd92e4b70f91131c573293343bc5f21f215',
    value: caver.utils.toPeb(1, 'KLAY'),
    gas: 25000,
    feeRatio: 30,
})

// Create a feeDelegatedValueTransferWithRatio from RLP-encoded string
> caver.transaction.feeDelegatedValueTransferWithRatio('0x0af8d78204d219830f4240947b65b75d204abed71587c9e519a89277766ee1d00a94a94f5374fce5edbc8e2a8697c15331677e6ebf0b1ef845f84325a0dde32b8241f039a82b124fe94d3e556eb08f0d6f26d07dcc0f3fca621f1090caa01c8c336b358ab6d3a2bbf25de2adab4d01b754e2fb3b9b710069177d54c1e956945a0043070275d9f6054307ee7348bd660849d90ff845f84326a0091ecf53f91bb97bb694f2f2443f3563ac2b646d651497774524394aae396360a044228b88f275aa1ec1bab43681d21dc7e3a676786ed1906f6841d0a1a188f88a')
FeeDelegatedValueTransferWithRatio {
    _type: 'TxTypeFeeDelegatedValueTransferWithRatio',
    _from: '0xa94f5374fce5edbc8e2a8697c15331677e6ebf0b',
    _gas: '0xf4240',
    _nonce: '0x4d2',
    _gasPrice: '0x19',
    _signatures: [ SignatureData { _v: '0x25', _r: '0xdde32...', _s: '0x1c8c3...' } ],
    _feePayer: '0x5a0043070275d9f6054307ee7348bd660849d90f',
    _feePayerSignatures: [ SignatureData { _v: '0x26', _r: '0x091ec...', _s: '0x44228...' } ],
    _feeRatio: '0x1e',
    _to: '0x7b65b75d204abed71587c9e519a89277766ee1d0',
    _value: '0xa'
}

FeeDelegatedValueTransferMemoWithRatio

caver.transaction.feeDelegatedValueTransferMemoWithRatio.create(transactionObject)

FeeDelegatedValueTransferMemoWithRatio represents a fee delegated value transfer memo with ratio transaction. The transactionObject can have properties below to create a FeeDelegatedValueTransferMemoWithRatio transaction.

FeeDelegatedValueTransferMemoWithRatio has the properties below as its member variables. Properties marked as optional refer to properties that can be optionally defined in transactionObject when the user creates FeeDelegatedValueTransferMemoWithRatio transaction.

NOTE: You can create an instance of FeeDelegatedValueTransferMemoWithRatio from RLP-encoded strings. Please refer to the below example. NOTE: caver.transaction.feeDelegatedValueTransferMemoWithRatio.create is supported since caver-js v1.6.1.

NOTE: As of caver-js v1.8.1-rc.4, creating transactions is only supported using the create function. If you've been creating transactions using a constructor like new caver.transaction.feeDelegatedValueTransferMemoWithRatio({...}), please change it to caver.transaction.feeDelegatedValueTransferMemoWithRatio.create({...}).

properties

NameTypeDescription

value

string

The amount of KLAY in peb to be transferred. You can use caver.utils.toPeb.

from

string

The address of the sender.

to

string

The account address that will receive the transferred value.

input

string

Data attached to the transaction. The message should be passed to this property.

gas

string

The maximum amount of transaction fee the transaction is allowed to use.

feeRatio

string

The ratio that constitutes the proportion of the transaction fee the fee payer will be burdened with. The valid range of this ratio is between 1 and 99. The ratio of 0, or 100 and above are not allowed.

signatures

Array

(optional) An array of signatures.

feePayerSignatures

Array

(optional) An array of feePayerSignatures.

feePayer

string

(optional) The address of fee payer.

nonce

string

(optional) A value used to uniquely identify a sender’s transaction. If omitted, caver.rpc.klay.getTransactionCount(address, 'pending') will be used to set nonce.

gasPrice

string

(optional) A multiplier to get how much the sender will pay in tokens. If omitted, caver.rpc.klay.getGasPrice will be used to set gasPrice.

chainId

string

(optional) The chain id of the Klaytn network. If omitted, caver.rpc.klay.getChainId will be used to set chainId.

Example

// Create a feeDelegatedValueTransferMemoWithRatio
> caver.transaction.feeDelegatedValueTransferMemoWithRatio({
    from: '0x{address in hex}',
    to: '0x9957dfd92e4b70f91131c573293343bc5f21f215',
    value: caver.utils.toPeb(1, 'KLAY'),
    gas: 25000,
    input: '0x68656c6c6f',
    feeRatio: 30,
})

// Create a feeDelegatedValueTransferMemoWithRatio from RLP-encoded string
> caver.transaction.feeDelegatedValueTransferMemoWithRatio('0x12f8dd8204d219830f4240947b65b75d204abed71587c9e519a89277766ee1d00a94a94f5374fce5edbc8e2a8697c15331677e6ebf0b8568656c6c6f1ef845f84326a0769f0afdc310289f9b24decb5bb765c8d7a87a6a4ae28edffb8b7085bbd9bc78a06a7b970eea026e60ac29bb52aee10661a4222e6bdcdfb3839a80586e584586b4945a0043070275d9f6054307ee7348bd660849d90ff845f84325a0c1c54bdc72ce7c08821329bf50542535fac74f4bba5de5b7881118a461d52834a03a3a64878d784f9af91c2e3ab9c90f17144c47cfd9951e3588c75063c0649ecd')
FeeDelegatedValueTransferMemoWithRatio {
    _type: 'TxTypeFeeDelegatedValueTransferMemoWithRatio',
    _from: '0xa94f5374fce5edbc8e2a8697c15331677e6ebf0b',
    _gas: '0xf4240',
    _nonce: '0x4d2',
    _gasPrice: '0x19',
    _signatures: [ SignatureData { _v: '0x26', _r: '0x769f0...', _s: '0x6a7b9...' } ],
    _feePayer: '0x5a0043070275d9f6054307ee7348bd660849d90f',
    _feePayerSignatures: [ SignatureData { _v: '0x25', _r: '0xc1c54...', _s: '0x3a3a6...' } ],
    _feeRatio: '0x1e',
    _to: '0x7b65b75d204abed71587c9e519a89277766ee1d0',
    _value: '0xa',
    _input: '0x68656c6c6f'
}

FeeDelegatedAccountUpdateWithRatio

caver.transaction.feeDelegatedAccountUpdateWithRatio.create(transactionObject)

FeeDelegatedAccountUpdateWithRatio represents a fee delegated account update with ratio transaction. The transactionObject can have properties below to create a FeeDelegatedAccountUpdateWithRatio transaction.

FeeDelegatedAccountUpdateWithRatio has the properties below as its member variables. Properties marked as optional refer to properties that can be optionally defined in transactionObject when the user creates FeeDelegatedAccountUpdateWithRatio transaction.

NOTE: You can create an instance of FeeDelegatedAccountUpdateWithRatio from RLP-encoded strings. Please refer to the below example. NOTE: caver.transaction.feeDelegatedAccountUpdateWithRatio.create is supported since caver-js v1.6.1.

NOTE: As of caver-js v1.8.1-rc.4, creating transactions is only supported using the create function. If you've been creating transactions using a constructor like new caver.transaction.feeDelegatedAccountUpdateWithRatio({...}), please change it to caver.transaction.feeDelegatedAccountUpdateWithRatio.create({...}).

properties

NameTypeDescription

from

string

The address of the sender.

account

[Account]

An [Account] instance that contains the information needed to update your account.

gas

string

The maximum amount of transaction fee the transaction is allowed to use.

feeRatio

string

The ratio that constitutes the proportion of the transaction fee the fee payer will be burdened with. The valid range of this ratio is between 1 and 99. The ratio of 0, or 100 and above are not allowed.

signatures

Array

(optional) An array of signatures.

feePayerSignatures

Array

(optional) An array of feePayerSignatures.

feePayer

string

(optional) The address of fee payer.

nonce

string

(optional) A value used to uniquely identify a sender’s transaction. If omitted, caver.rpc.klay.getTransactionCount(address, 'pending') will be used to set nonce.

gasPrice

string

(optional) A multiplier to get how much the sender will pay in tokens. If omitted, caver.rpc.klay.getGasPrice will be used to set gasPrice.

chainId

string

(optional) The chain id of the Klaytn network. If omitted, caver.rpc.klay.getChainId will be used to set chainId.

For how to create an [Account] instance for each AccountKey type, refer to Getting Started - Account Update or caver.account.create.

Example

// Create a feeDelegatedAccountUpdateWithRatio
> caver.transaction.feeDelegatedAccountUpdateWithRatio({
    from: '0x{address in hex}',
    gas: 50000,
    account: caver.account.createWithAccountKeyLegacy('0x{address in hex}'),
    feeRatio: 30,
})

// Create a feeDelegatedAccountUpdateWithRatio from RLP-encoded string
> caver.transaction.feeDelegatedAccountUpdateWithRatio('0x22f8ec018505d21dba00830493e0945c525570f2b8e7e25f3a6b5e17f2cc63b872ece7a302a102a1d2af887950891813bf7d851bce55f47246a5269a5d4be1fc0ab78d78ae0f5a1ef847f845820feaa08553a692cd8f86af4d335785468a5b4527ee1a2d0c5e18517fe39375e4e82d85a0698db3a07cc81427eb8ea877bb8af33d66abfb29526f58db6997eb99010be4fd94294f5bc8fadbd1079b191d9c47e1f217d6c987b4f847f845820feaa0a44cbc6e30f9df61633ed1714014924b8b614b315288cdfd795c5ba18d36d5d8a0011611104f18e3bb3d32508317a0ce6d31f0a71d55e2363b02a47aabbc7bf9d4')
FeeDelegatedAccountUpdateWithRatio {
    _type: 'TxTypeFeeDelegatedAccountUpdateWithRatio',
    _from: '0x5c525570f2b8e7e25f3a6b5e17f2cc63b872ece7',
    _gas: '0x493e0',
    _nonce: '0x1',
    _gasPrice: '0x5d21dba00',
    _signatures: [ SignatureData { _v: '0x0fea', _r: '0x8553a...', _s: '0x698db...' } ],
    _feePayer: '0x294f5bc8fadbd1079b191d9c47e1f217d6c987b4',
    _feePayerSignatures: [ SignatureData { _v: '0x0fea', _r: '0xa44cb...', _s: '0x01161...' } ],
    _feeRatio: '0x1e',
    _account: Account {
        _address: '0x5c525570f2b8e7e25f3a6b5e17f2cc63b872ece7',
        _accountKey: AccountKeyPublic { _publicKey: '0x02a1d...' }
    }
}

FeeDelegatedSmartContractDeployWithRatio

caver.transaction.feeDelegatedSmartContractDeployWithRatio.create(transactionObject)

FeeDelegatedSmartContractDeployWithRatio represents a fee delegated smart contract deploy with ratio transaction. The transactionObject can have properties below to create a FeeDelegatedSmartContractDeployWithRatio transaction.

FeeDelegatedSmartContractDeployWithRatio has the properties below as its member variables. Properties marked as optional refer to properties that can be optionally defined in transactionObject when the user creates FeeDelegatedSmartContractDeployWithRatio transaction.

NOTE: You can create an instance of FeeDelegatedSmartContractDeployWithRatio from RLP-encoded strings. Please refer to the below example. NOTE: caver.transaction.feeDelegatedSmartContractDeployWithRatio.create is supported since caver-js v1.6.1.

NOTE: As of caver-js v1.8.1-rc.4, creating transactions is only supported using the create function. If you've been creating transactions using a constructor like new caver.transaction.feeDelegatedSmartContractDeployWithRatio({...}), please change it to caver.transaction.feeDelegatedSmartContractDeployWithRatio.create({...}).

properties

NameTypeDescription

from

string

The address of the sender.

input

string

Data attached to the transaction. The byte code of the smart contract to be deployed and its arguments. You can get this through caver.abi.encodeContractDeploy.

gas

string

The maximum amount of transaction fee the transaction is allowed to use.

feeRatio

string

The ratio that constitutes the proportion of the transaction fee the fee payer will be burdened with. The valid range of this ratio is between 1 and 99. The ratio of 0, or 100 and above are not allowed.

value

string

(optional, default: '0x0') The amount of KLAY in peb to be transferred. You can use caver.utils.toPeb.

to

string

(optional, default: '0x') Address to which the smart contract is deployed. Currently, this value cannot be defined. Specifying the address will be supported in the future.

humanReadable

boolean

(optional, default: false) This must be false since human-readable address is not supported yet.

codeFormat

string

(optional, default: 'EVM') The code format of smart contract code. The supported value, for now, is EVM only. This value is converted to hex string after the assignment(e.g> EVM is converted to 0x0) internally.

signatures

Array

(optional) An array of signatures.

feePayerSignatures

Array

(optional) An array of feePayerSignatures.

feePayer

string

(optional) The address of fee payer.

nonce

string

(optional) A value used to uniquely identify a sender’s transaction. If omitted, caver.rpc.klay.getTransactionCount(address, 'pending') will be used to set nonce.

gasPrice

string

(optional) A multiplier to get how much the sender will pay in tokens. If omitted, caver.rpc.klay.getGasPrice will be used to set gasPrice.

chainId

string

(optional) The chain id of the Klaytn network. If omitted, caver.rpc.klay.getChainId will be used to set chainId.

Example

// Create a feeDelegatedSmartContractDeployWithRatio
> caver.transaction.feeDelegatedSmartContractDeployWithRatio({
    from: '0x{address in hex}',
    input: '0x60806...',
    gas: 100000,
    feeRatio: 30,
})

// Create a feeDelegatedSmartContractDeployWithRatio from RLP-encoded string
> caver.transaction.feeDelegatedSmartContractDeployWithRatio('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')
FeeDelegatedSmartContractDeployWithRatio {
    _type: 'TxTypeFeeDelegatedSmartContractDeployWithRatio',
    _from: '0x294f5bc8fadbd1079b191d9c47e1f217d6c987b4',
    _gas: '0x493e0',
    _nonce: '0xe',
    _gasPrice: '0x5d21dba00',
    _signatures: [ SignatureData { _v: '0x0fe9', _r: '0x8a20b...', _s: '0x5ba8a...' } ],
    _feePayer: '0xc56a1fafa968d64d19b4b81c306ecbab6e489743',
    _feePayerSignatures: [ SignatureData { _v: '0x0fe9', _r: '0xa525c...', _s: '0x5ea75...' } ],
    _feeRatio: '0x1e',
    _to: '0x',
    _value: '0x0',
    _input: '0x60806...',
    _humanReadable: false,
    _codeFormat: '0x0'
}

FeeDelegatedSmartContractExecutionWithRatio

caver.transaction.feeDelegatedSmartContractExecutionWithRatio.create(transactionObject)

FeeDelegatedSmartContractExecutionWithRatio represents a fee delegated smart contract execution with ratio transaction. The transactionObject can have properties below to create a FeeDelegatedSmartContractExecutionWithRatio transaction.

FeeDelegatedSmartContractExecutionWithRatio has the properties below as its member variables. Properties marked as optional refer to properties that can be optionally defined in transactionObject when the user creates FeeDelegatedSmartContractExecutionWithRatio transaction.

NOTE: You can create an instance of FeeDelegatedSmartContractExecutionWithRatio from RLP-encoded strings. Please refer to the below example. NOTE: caver.transaction.feeDelegatedSmartContractExecutionWithRatio.create is supported since caver-js v1.6.1.

NOTE: As of caver-js v1.8.1-rc.4, creating transactions is only supported using the create function. If you've been creating transactions using a constructor like new caver.transaction.feeDelegatedSmartContractExecutionWithRatio({...}), please change it to caver.transaction.feeDelegatedSmartContractExecutionWithRatio.create({...}).

properties

NameTypeDescription

from

string

The address of sender.

to

string

The address of the smart contract account to be executed.

input

string

Data attached to the transaction, used for transaction execution. The input is an encoded string that indicates a function to call and parameters to be passed to this function. You can get this encoded string through caver.abi.encodeFunctionCall.

gas

string

The maximum amount of transaction fee the transaction is allowed to use.

feeRatio

string

The ratio that constitutes the proportion of the transaction fee the fee payer will be burdened with. The valid range of this ratio is between 1 and 99. The ratio of 0, or 100 and above are not allowed.

value

string

(optional, default: '0x0') The amount of KLAY in peb to be transferred. You can use caver.utils.toPeb.

signatures

Array

(optional) An array of signatures.

feePayerSignatures

Array

(optional) An array of feePayerSignatures.

feePayer

string

(optional) The address of fee payer.

nonce

string

(optional) A value used to uniquely identify a sender’s transaction. If omitted, caver.rpc.klay.getTransactionCount(address, 'pending') will be used to set nonce.

gasPrice

string

(optional) A multiplier to get how much the sender will pay in tokens. If omitted, caver.rpc.klay.getGasPrice will be used to set gasPrice.

chainId

string

(optional) The chain id of the Klaytn network. If omitted, caver.rpc.klay.getChainId will be used to set chainId.

Example

// Create a feeDelegatedSmartContractExecutionWithRatio
> caver.transaction.feeDelegatedSmartContractExecutionWithRatio({
    from: '0x{address in hex}',
    to: '0x{address in hex}',
    input: '0xa9059...',
    gas: 90000,
    feeRatio: 30,
})

// Create a feeDelegatedSmartContractExecutionWithRatio from RLP-encoded string
> caver.transaction.feeDelegatedSmartContractExecutionWithRatio('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')
FeeDelegatedSmartContractExecutionWithRatio {
    _type: 'TxTypeFeeDelegatedSmartContractExecutionWithRatio',
    _from: '0xa94f5374fce5edbc8e2a8697c15331677e6ebf0b',
    _gas: '0xf4240',
    _nonce: '0x4d2',
    _gasPrice: '0x19',
    _signatures: [ SignatureData { _v: '0x26', _r: '0x74ccf...', _s: '0x4c937...' } ],
    _feePayer: '0x5a0043070275d9f6054307ee7348bd660849d90f',
    _feePayerSignatures: [ SignatureData { _v: '0x25', _r: '0x4a499...', _s: '0x0f8cb...' } ],
    _feeRatio: '0x1e',
    _to: '0x7b65b75d204abed71587c9e519a89277766ee1d0',
    _value: '0xa',
    _input: '0x6353586b000000000000000000000000bc5951f055a85f41a3b62fd6f68ab7de76d299b2'
}

FeeDelegatedCancelWithRatio

caver.transaction.feeDelegatedCancelWithRatio.create(transactionObject)

FeeDelegatedCancelWithRatio represents a fee delegated cancel with ratio transaction. The transactionObject can have properties below to create a FeeDelegatedCancelWithRatio transaction.

FeeDelegatedCancelWithRatio has the properties below as its member variables. Properties marked as optional refer to properties that can be optionally defined in transactionObject when the user creates FeeDelegatedCancelWithRatio transaction.

NOTE: You can create an instance of FeeDelegatedCancelWithRatio from RLP-encoded strings. Please refer to the below example. NOTE: caver.transaction.feeDelegatedCancelWithRatio.create is supported since caver-js v1.6.1.

NOTE: As of caver-js v1.8.1-rc.4, creating transactions is only supported using the create function. If you've been creating transactions using a constructor like new caver.transaction.feeDelegatedCancelWithRatio({...}), please change it to caver.transaction.feeDelegatedCancelWithRatio.create({...}).

properties

NameTypeDescription

from

string

The address of the sender.

gas

string

The maximum amount of transaction fee the transaction is allowed to use.

feeRatio

string

The ratio that constitutes the proportion of the transaction fee the fee payer will be burdened with. The valid range of this ratio is between 1 and 99. The ratio of 0, or 100 and above are not allowed.

nonce

string

(optional) A value used to uniquely identify a sender’s transaction. If omitted, caver.rpc.klay.getTransactionCount(address, 'pending') will be used to set nonce.

signatures

Array

(optional) An array of signatures.

feePayerSignatures

Array

(optional) An array of feePayerSignatures.

feePayer

string

(optional) The address of fee payer.

gasPrice

string

(optional) A multiplier to get how much the sender will pay in tokens. If omitted, caver.rpc.klay.getGasPrice will be used to set gasPrice.

chainId

string

(optional) The chain id of the Klaytn network. If omitted, caver.rpc.klay.getChainId will be used to set chainId.

Example

// Create a feeDelegatedCancelWithRatio
> caver.transaction.feeDelegatedCancelWithRatio({
    from: '0x{address in hex}',
    nonce: 1,
    gas: 25000,
    feeRatio: 30,
})

// Create a feeDelegatedCancelWithRatio from RLP-encoded string
> caver.transaction.feeDelegatedCancelWithRatio('0x3af8c18204d219830f424094a94f5374fce5edbc8e2a8697c15331677e6ebf0b1ef845f84326a072efa47960bef40b536c72d7e03ceaf6ca5f6061eb8a3eda3545b1a78fe52ef5a062006ddaf874da205f08b3789e2d014ae37794890fc2e575bf75201563a24ba9945a0043070275d9f6054307ee7348bd660849d90ff845f84326a06ba5ef20c3049323fc94defe14ca162e28b86aa64f7cf497ac8a5520e9615614a04a0a0fc61c10b416759af0ce4ce5c09ca1060141d56d958af77050c9564df6bf')
FeeDelegatedCancelWithRatio {
    _type: 'TxTypeFeeDelegatedCancelWithRatio',
    _from: '0xa94f5374fce5edbc8e2a8697c15331677e6ebf0b',
    _gas: '0xf4240',
    _nonce: '0x4d2',
    _gasPrice: '0x19',
    _signatures: [ SignatureData { _v: '0x26', _r: '0x72efa...', _s: '0x62006...' } ],
    _feePayer: '0x5a0043070275d9f6054307ee7348bd660849d90f',
    _feePayerSignatures: [ SignatureData { _v: '0x26', _r: '0x6ba5e...', _s: '0x4a0a0...' } ],
    _feeRatio: '0x1e'
}

FeeDelegatedChainDataAnchoringWithRatio

caver.transaction.feeDelegatedChainDataAnchoringWithRatio.create(transactionObject)

FeeDelegatedChainDataAnchoringWithRatio represents a fee delegated chain data anchoring with ratio transaction. The transactionObject can have properties below to create a FeeDelegatedChainDataAnchoringWithRatio transaction.

FeeDelegatedChainDataAnchoringWithRatio has the properties below as its member variables. Properties marked as optional refer to properties that can be optionally defined in transactionObject when the user creates FeeDelegatedChainDataAnchoringWithRatio transaction.

NOTE: You can create an instance of FeeDelegatedChainDataAnchoringWithRatio from RLP-encoded strings. Please refer to the below example. NOTE: caver.transaction.feeDelegatedChainDataAnchoringWithRatio.create is supported since caver-js v1.6.1.

NOTE: As of caver-js v1.8.1-rc.4, creating transactions is only supported using the create function. If you've been creating transactions using a constructor like new caver.transaction.feeDelegatedChainDataAnchoringWithRatio({...}), please change it to caver.transaction.feeDelegatedChainDataAnchoringWithRatio.create({...}).

properties

NameTypeDescription

from

string

The address of the sender.

input

string

Data of the service chain.

gas

string

The maximum amount of transaction fee the transaction is allowed to use.

feeRatio

string

The ratio that constitutes the proportion of the transaction fee the fee payer will be burdened with. The valid range of this ratio is between 1 and 99. The ratio of 0, or 100 and above are not allowed.

nonce

string

(optional) A value used to uniquely identify a sender’s transaction. If omitted, caver.rpc.klay.getTransactionCount(address, 'pending') will be used to set nonce.

signatures

Array

(optional) An array of signatures.

feePayerSignatures

Array

(optional) An array of feePayerSignatures.

feePayer

string

(optional) The address of fee payer.

gasPrice

string

(optional) A multiplier to get how much the sender will pay in tokens. If omitted, caver.rpc.klay.getGasPrice will be used to set gasPrice.

chainId

string

(optional) The chain id of the Klaytn network. If omitted, caver.rpc.klay.getChainId will be used to set chainId.

Example

// Create a feeDelegatedChainDataAnchoringWithRatio
> caver.transaction.feeDelegatedChainDataAnchoringWithRatio({
    from: '0x{address in hex}',
    gas: 50000,
    input: '0xf8a6a...',
    feeRatio: 30,
})

// Create a feeDelegatedChainDataAnchoringWithRatio from RLP-encoded string
> caver.transaction.feeDelegatedChainDataAnchoringWithRatio('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')
FeeDelegatedChainDataAnchoringWithRatio {
    _type: 'TxTypeFeeDelegatedChainDataAnchoringWithRatio',
    _from: '0xa94f5374fce5edbc8e2a8697c15331677e6ebf0b',
    _gas: '0x174876e800',
    _nonce: '0x12',
    _gasPrice: '0x5d21dba00',
    _signatures: [ SignatureData { _v: '0x26', _r: '0xc612a...', _s: '0x0c734...' } ],
    _feePayer: '0x33f524631e573329a550296f595c820d6c65213f',
    _feePayerSignatures: [ SignatureData { _v: '0x25', _r: '0xa3e40...', _s: '0x6707e...' } ],
    _feeRatio: '0x58',
    _input: '0xf8ad8...'
}

Last updated